I-GTY160 Hydraulic Standard Type Bulldozer
inkcazo1
01
Ipleyiti yentsimbi Ulwakhiwo lwebhokisi epheleleyo
Isakhelo esiphambili se-bulldozer sisebenzisa ulwakhiwo lwentsimbi oluhlanganisiweyo olupheleleyo oludityaniswe ne-back axle housing. Olu yilo luqinileyo lunika ukumelana okugqwesileyo kwimithwalo echaphazelekayo, ukugoba, kunye noxinzelelo lwe-torsional. Iindlela zokuwelda ngokuchanekileyo ziqinisekisa ukuthembeka kwesakhiwo kulo lonke ixesha lokusebenza komatshini.
Ikhabhathi entsha ye-hexahedral inika ukubonakala okugqwesileyo, umoya onamandla kwaye ayinalo uthuli olungenakuthelekiswa nanto.
Ukusebenza kakuhle kwamandla enjini kuphezulu, amandla aphezulu okukhupha i-torque, ukusetyenziswa kwepetroli okuphantsi, ngelixa ukuthembeka kungcono
Iinkcukacha zemveliso
Imodeli | GTY160 |
Uhlobo | Uhlobo lwe-Hydraulic Crawler oluqhelekileyo |
Imodeli yeNjini | I-WEICHAI WD10G178E25 |
Ukufuduka (L) | 9.726 |
Amandla alinganisiweyo (kw/rpm) | 131/1850 |
I-Max.torque(Nm/rpm) | 830/1000-1200 |
Ubunzima bokusebenza (ngaphandle kweripha) | 16.4T |
Ubungakanani (ngaphandle kweripper)(mm) | 4990×3440×3110 |
Ukususwa komhlaba okuncinci (mm) | 405 |
Uxinzelelo lomhlaba (MPa) | 0.066 |
Igeyiji yokulandelela (mm) | 1880 |
Umthamo wokozela (m³) | 4.5 |
Ububanzi beblade (mm) | 3440 |
Ukuphakama kweblade (mm) | 1135 |
Ukuphakama kokuphakamisa iiblade (mm) | 1095 |
Ukuphakama kwe-blade tilt (mm) | 400 |
Ukwehla okuphezulu ngaphantsi komhlaba (mm) | 540 |
Ububanzi bezihlangu zeTrack (mm) | 510 |
Iphimbo (mm) | 203.2 |
Ubungakanani bekhonkco lomkhondo | 37 |
Ubungakanani beerola zeCarrier | 4 |
Ubungakanani beerola zeTrack | 12(8 kabini + 4 inye) |
Uxinzelelo oluphezulu (MPa) | 14 |
Ukukhupha (L/min) | 227 |
Amandla amakhulu etrektara(kN) | 144 |
Ubuchule bamabanga | 30° |
Isantya Sokuya Phambili(Km/h) | F1:0-3.29 |
F2:0-5.82 | |
F3:0-9.63 | |
Isantya sangasemva (Km/h) | R1:0-4.28 |
R2:0-7.59 | |
R3:0-12.53 |